|
HI-LIFT OFF ROAD WINCH KIT
the Off-Road Winch Kit will turn your Hi-Lift Jack into an even more versatile tool. This kit keeps all of the needed parts for winching at arms reach. Even if you have a winch this kit could be a life saver if your powered winch become disabled for any reason out on the trail, or if you need to winch a vehicle from a angle where a truck mounted winch can't get to. Kit Includes: 1 - Winch Tensioner 1 - Custom Nose Attachment 1 - 8ft. Tree Saver Strap 1 - Pair/Hi-Lift Gloves Hardware & G...
$55.95
|
|
|
|
HI-LIFT BUMPER LIFT
The Bumper Lift Attachment is designed to fit most steel curved bumpers, for quick and easy lifting. The Bumper Lift has a 3,000lb(1361 kg) capacity. When used with the Hi-Lift Jack, which is not itself designed to be used on curved bumpers, the Bumper Lift makes raising one wheel of most average sized vehicles up to 2" (5 cm) above the ground an easy task.
$20.95
|
|
|
|
Aussie Jack Adaptor
The Aussie Jack Adapter allows the user to lift a vehicle from the axles hub, without having to lift the entire vehicle body. Used with a Hi Lift jack, the Aussie Jack Adapter can get a high centered truck going, get a vehicle out of a rut, allow chains to be installed, etc. Long travel suspensions may max out the lift of most jacks. The Aussie Jack Adapter solves this problem. Each Aussie Jack Adapter is made in Australia and is powder coated for a long service life. Units fold flat for ease...
$39.95
|
|
|
|
HI-LIFT JACK PROTECTOR
Protect your Jack from the Elements! Protects your Hi-Lift Jack from weather, mud, dirt and sand. Made of durable vinyl-coated nylon, the Jack Protector is waterproof, as well as mildew and decay resistant. Fits 36", 42", 48" and 60" Hi-Lift Jacks. The Jack Protector WILL work with the 4XRAC and the LOC-RAC. (user will have to place holes in protector) (Note: All working parts of the 60" jack are protected. However, the foot piece and 5" of steel bar are exposed.)
$22.95
|
|
|
|
Hi-Lift Off Road Base
Off-Road Base helps prevents jack sinkage on soft ground and its light weight, only 4 pounds! This is a must have when using your jack in soft terrain. The Hi-Lift Offroad Base, also adds stability on hard ground.
$33.95
|
|
|
|
HI-LIFT 4XRAC
The Hi-Lift 4XRAC is designed for serious off-roaders who are looking for an easy, inexpensive way to stow their Hi-Lift Jack in a convenient, secure location. 1/8" steel construction holds up under the strain of off-road travel A padlock can be placed through a hole in the carriage bolt. All mounting hardware and instructions are included (some drilling required) Mounting brackets are slotted for adjustment. Velcro handle strap secures handle to jack bar. Each kit contains 2 mounting bracket...
$27.36
|
|
|
|
HI-LIFT LOC-RAC
A convenient mounting and locking device for storage of your Hi-Lift Jack. The Loc-Rac is manufactured of high-quality steel. The lock is included Installation is simple. It can be mounted horizontally or vertically, with or without a Jack Protector. Your Hi-Lift Jack is mounted in the Loc-Rac to deter theft. It also places the Jack in an easy to reach location.
$24.95
|
|
|
|
HI-LIFT FIX IT KIT
Hi-Lift Fix-It-Kit Keep your Hi-Lift Jack operating trouble-free. The Fix-It-Kit has the principle parts for servicing all Hi-Lift Jack lifting units Kit Includes: 2 Climbing Pins, 2 Climbing Pin Springs, 2 Cross Pins, 1 Shear Bolt & Nut, and 1 tube of jack lubricant.
$13.95
|
|
|
|
HI-LIFT LIFT MATE
Now lift late-model vehicles with the Hi-Lift jack! Plastic bumpers and extreme lift-kits are no longer a problem.Many trucks and SUV's have larger tires and/or lift kits that require extensive lifting height ability from the bumper jack. The Lift-Mate is designed to operate in a manner that allows the vehicle wheel to be lifted directly from the wheel, greatly reducing the amount of travel up the jack bar needed to lift the wheel in an adequate and safe height.Features & Specif...
$34.95
|
|
|
|
2" RATCHET STRAP WITH CHAIN ENDS 10,000lb
These 10,000lb Chain end Ratchet Straps Can be very handy out on the trail. They can be used to tie down gear, hold broken parts in place, or It can be used as an emergency tow strap. You can also use two of them to replace the chain when using your Hi-Lift jack as a winch. These straps weigh in at 9lbs each. Compare that to 30 feet of grade 80 3/8" chain which weighs 49# and retails for $120.00. List: 59.95
$49.95
|
|
|
|
GRADE 80 CHAIN
Grade 80 Chain is the only kind of chain that is safe to use. Any other chain even grade 70 is steel chain which is brittle. This means that if you pull it to the breaking point it just breaks. On the other hand grade 80 chain is alloy chain which means that if you overpull it, it will bend and stretch before it breaks giving you the chance to stop pulling before it breaks. This is why grade 80 chain is the only chain rated for overhead lifting because it has an extra margin of safety built i...
|
|
|
|
Daystar Hi-Lift Jack Handle Isolator
Daystar Hi-Lift Jack Handle Isolator Keep your Hi-Lift jack from rattling when stored on your rig. This handy Polyurethane handle isolator will help keep your jacks handle in place and quiet. The DayStar Hi-Lift Jack Handle Isolator comes in 2 colors Black or Red.
$10.95
|
|
|
